GB ELECTRICAL INC -- POLY-GEL, 79-301 -- 8010-00N083730
===================== Product Identification ===================== Product ID:POLY-GEL, 79-301 MSDS Date:04/01/1994 FSC:8010 NIIN:00N083730 === Responsible Party === Company Name:GB ELECTRICAL INC Address:6101 N BAKER RD City:MILWAUKEE State:WI ZIP:53209 Country:US Info Phone Num:800-624-4320 Emergency Phone Num:800-624-4320 CAGE:HO886 === Contractor Identification === Company Name:GARDNER BENDER, INCORPORATED Address:6101 N. BAKER ROAD Box:City:MILWAUKEE State:WI ZIP:53209 Phone:414-352-4160 CAGE:62933 Company Name:GB ELECTRICAL INC Address:6101 N BAKER RD Box:City:MILWAUKEE State:WI ZIP:53209 Country:US Phone:414-352-4160 CAGE:HO886 ============= Composition/Information on Ingredients ============= Ingred Name:ETHYLENE GLYCOL; (1,2ETHANEFIOL) (SARA 313) (CERCLA) CAS:107-21-1 RTECS #:KW2975000 Fraction by Wt: 30% OSHA PEL:N/K ACGIH TLV:50 PPM, VAPOR, C EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB Ingred Name:POLYETHYLENE RESINS OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CARBOXYMETHYL CELLULOSE RESINS OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:GLYCOL INHIBITORS OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:DYE OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:GLUCITOL; (SORBITOL) CAS:50-70-4 RTECS #:LZ4290000 OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:PRESERVATIVES OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:ETHANOL, 2,2',2"- NITRILOTRI-; (TRIETHANOLAMINE) CAS:102-71-6 RTECS #:KL9275000 OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:CARRIERS OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:POSSIBLE EFFECTS COULD INCLUDE HEADACHE, NASAL OR RESPIRATORY IRRITATION, NAUSEA, FATIGUE, PNEUMONITIS, PULMONARY EDEMA, CENTRAL NERVOUS SYSTEM DEPRESSION. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH EYES WELL W/CLEAR WATER FOR AT LEAST 15 MIN OR UNTIL IRRITATION SUBSIDES. SKIN: REMOVE CONTAM CLTHG, WASH SKIN THOROUGHLY W/WARM WATER AND SOAP. SKIN EXPOSURE MAY CAUSE DERMATITIS DUE TO D EFATTING OF KERATIN LAYER. INHAL: MOVE PERSON TO WELL VENTILATED ROOM. INGEST: IF CONSCIOUS, HAVE VICTIM CONSUME 16 OZ OF MILK OR WATER. DO NOT INDUCE VOMITING. OBTAIN IMMEDIATE MEDICAL ASSISTANCE! ===================== Fire Fighting Measures ===================== Flash Point:NON-COMBUSTIBLE Lower Limits:1% Upper Limits:8% Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM. Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NOT APPLICABLE. ================== Accidental Release Measures ================== Spill Release Procedures:VACUUM OR SWEEP INTO CLOSED CONTAINER FOR RE-USE OR DISPOSAL. NOTIFY PROPER AUTHORITIES IF CHEMICALS ENTER SEWERS, WATERWAYS OR EXTENSIVE LAND AREAS. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:FOLLOW RECOMMENDATIONS ON LABEL. USE GOOD INDUSTRIAL HYGIENE PRACTICES. Other Precautions:MATERIAL MAY BE HAZARDOUS WHEN EMPTIED, SINCE EMPTY CONTAINERS RETAIN RESIDUES (VAPOR, LIQUID AND/OR SOLIDS). DISPOSE OF WASTE IN SAFE, CLOSED CONTAINER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS. USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:PROVIDE ADEQUATE VENTILATION. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . TO PREVENT PROLONGED SKIN EXPOSURE, WEAR IMPERVIOUS CLOTHING AND BOOTS. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:210F,99C Melt/Freeze Pt:M.P/F.P Text:28.0F,-2.2C Vapor Pres:0.08 Vapor Density:2.1 Spec Gravity:1.008 (H*2O=1) Evaporation Rate & Reference:785 (BUTYACETATE=1) Solubility in Water:PARTIAL Appearance and Odor:BLUE, THICK CLEAR GEL. Percent Volatiles by Volume:96-97 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID STRONG MINERAL ACIDS AND OXIDIZERS. Stability Condition to Avoid:NOT APPLICABLE. Hazardous Decomposition Products:NOT APPLICABLE. ==================== Disposal Considerations ==================== Waste Disposal Methods:ENSURE CONFORMITY WITH FEDERAL, STATE AND LOCAL DISPOSAL REGULATIONS BY DISPOSING IN AN APPROVED SITE. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.