CORROSION TECHNOLOGIES CORP. -- CORROSION X MARINE -- 8030-01-437-5222
=====================  Product Identification  =====================

Product ID:CORROSION X MARINE
MSDS Date:02/15/1997
FSC:8030
NIIN:01-437-5222
=== Responsible Party ===
Company Name:CORROSION TECHNOLOGIES CORP.
Box:551625
City:DALLAS
State:TX
ZIP:75355-1625
Country:US
Info Phone Num:972-271-7361  FAX 972-278-9721
Emergency Phone Num:972-271-7361
CAGE:0VJ14
=== Contractor Identification ===
Company Name:CORROSION TECHNOLOGIES CORP.
Box:551625
City:DALLAS
State:TX
ZIP:75355-1625
Country:US
Phone:972-271-7361  FAX 972-278-9721
CAGE:0VJ14

=============  Composition/Information on Ingredients  =============

Ingred Name:BASE STOCK
CAS:72623-85-9
Fraction by Wt: 69.0%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3

Ingred Name:HYDROCARBON SOLVENT
CAS:72623-83-7
Fraction by Wt: 8.0%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM

Ingred Name:ZINC DINONYLNAPHTHALENE SULFONATE
CAS:8008-20-6
RTECS #:OA5500000
Fraction by Wt: 1.0%
Other REC Limits:NONE RECOMMENDED

Ingred Name:PROPELLANT (HYDROCARBON A70)
CAS:28016-00-4
Fraction by Wt: 12.0%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:(SEE HEALTH HAZARDS)
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT, RED, WATERY. SKIN: LD50 IS
    2000 MG/KG, DEFATTING, DERMATITIS, DRYING, CHAPPED. INHAL: LC50 =
    5000 PPM RAT. NOSE/THROAT/UPPER RESPIRATORY TRACT IRRIT, DIZZY,
    HEADACHE, NAUSEA. INGEST: NON-T OXIC. LD50 1400 MG/KG (RAT ORAL).
    HARMFUL, FATAL, MOUTH/THROAT/ESOPHAGUS IRRIT, NAUSEA, VOMIT, GI
    UPSET, DIARRHEA.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES, LIFTING LIDS. SKIN: REMOVE
    EXCESS BY WIPING, THEN WASH W/SOAP & WATER. WASH SOILED CLOTHES &
    SHOES W/DETERGENT. INHAL: REMOVE TO FRESH AIR. CPR IF NEEDED.
    INGEST: DO NT INDUCE VOMIT. DRINK 1/2 PINT OF MILK. CALL DR. IN ALL
    CASES, GET MED AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>285F,>141C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT W/SCBA. COVER
    W/EXTINGUISHING AGENT. DONT SPRAY W/WATER USING DIRECT STREAM INTO
    BURNING LIQUID AS THIS MAY SPREAD FIRE.
Unusual Fire/Explosion Hazard:AEROSOL CONTAINERS MAY EXPLODE IF HEATED
    ABOVE 120F. USE WATER SPRAY/MIST TO COOL CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE IGNITS. STOP FLOW BY MEANS OF DIKE
    OR BARRICADE. ABSORB SMALL SPILLS BY USING DRY CLAY OR COMMERCIAL
    ABSORBENT. COLLECT RESIDUE IN SUITABLE CONTAINER FOR DISPOSAL.
    MATERIAL MAY BE WASHED IN  STEEL FLOOR DRAINS EQUIPPED W/OIL
    INTERCEPTOR.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE APPROVED ORGANIC MIST RESPIRATOR.
Ventilation:SUFFICIENT VENTILATION BY GENERAL OR MECHANICAL MEANS TO
    INSURE THAT LEVELS ARE KEPT BELOW COMBUSTIBLE LIMITS.
Eye Protection:FACE MASK OR GOGGLES
Other Protective Equipment:APPLY MILD HAND CREAM IF HANDS BECOME DRY OR
    CHAPPED.
Work Hygienic Practices:WASH FACE & HANDS W/SOAP & WATER AFTER USE &
    BEFORE EATING, SMOKING, USING RESTROOM.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:8 @ 25C
Vapor Density:>1 (AIR=1)
Spec Gravity:0.877 (WATER=1)
Evaporation Rate & Reference:<1 (BUAC = 1)
Solubility in Water:SLIGHTLY EMULSIFABLE
Appearance and Odor:GREEN W/FRESH SCENT.
Percent Volatiles by Volume:>80.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS SUCH AS LIQUIDS, COMPRESSED OXYGEN, PEROXIDES OR
    CHLORINES.
Hazardous Decomposition Products:BURNING PRODUCTS NORMALLY BI-PRODUCTS
    OF COMBUSTION INCLUDE: CARBON MONOXIDE, PHENOLS OR PETROLEUM
    PRODUCTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN APPROVED LANDFILL SITE OR
    INCINERATE AT A LICENSED WASTE RECLAIMMING FACILITY. LIQUID WASTE
    MAY BE REMOVED BY MEANS OF LICENSED RECLAIMER UNDER USED OIL
    CLASSIFICATION. FOLLOW ALL FEDERA L, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.